A100
- Digtal Amplifer With Xmos Processor
- Active HiFi speakers with Hi Res audio and versatile connections; AUX RCA, PC, USB, Optical and Bluetooth
- Proprietary horn loaded aluminium ribbon tweet
- Phil Jones signature 5″ cast frame under-hung coil woofer with hard anodized aluminium cone
- The USB, Optical Inputs Support Up to 192KHz Input Sample
- Trabsparent Internal Wiring
Rp3,499
Stok habis
Stok habis
Also Available Here
Share
| Specifications | Airpulse A100 |
|---|---|
| Tweeter | Horn Loaded Ribbon Tweeter |
| Mid Woofer | 5" Aluminum Cone Underhung Design Neo. Power Mid-Woofer |
| Amplifier System | Digital Amplifier with Xmos Processor |
| Power Output | L/R(Treble) 10W + 10W, (Woofer) 40W + 40W |
| Frequency Range | 52Hz - 40KHz |
| Signal-Noise Ratio | L/R:≥90dB(A) |
| Input Mode | AUX, PC, USB, Optical, Bluetooth |
| Sample Rate Input Sensitivity | AUX: 450±50mV | PC: 550±50mV | USB: 400±50mFFs Optical: 400±50mFFs | Bluetooth: 450±50mFFs |
| Sub Out | 800mV Max (Changes as the master volume changes) |
| Treble Trimmer | 4KHz Shelf Filter -6dB +2.4dB |
| Bass Trimmer | 95Hz Shelf Filter -6dB +6dB |
| Mains Voltage | 100-240V AC/50~60Hz |
| Cabinet Size (WxHxD) | 160 X 283 X 255mm |
| Net Weight | 11 Kg Per Set |
Airpulse A100 FAQ:
A: Yes. you can connect to your TV via RCA cable, Optical or AUX cables. Please check your TV audio out port to see if it support these connectors.
A: Please check your speaker input mode. you can press the volume knob on the speaker to change mode. the LED indicator will change to represent current mode.
A: Press and hold the volume knob for approx. 8-10 seconds to clear Bluetooth Pairing. then you can pair with your phone/device.
A: Try change the battery and see if it works.
A: They are differ in sizes and power. A200 and A300 are much bigger than A80 and A100, More suitable for living room; A80 and A100 are smaller, suitable for desktop and small room.
A: Yes. you can connect sub-woofer via the sub-out port at the back of the speaker.
A: Disable “absolute volume” from your smartphones to solve this issue
1. Unpair your bluetooth speaker first.
2. Go to Settings.
3. Select “Additional Settings”
4. Select “Developer options”
5. Find and check on the “Disable absolute volume”
Restart your phone and try connect again
Recently Viewed
You haven't viewed at any of the products yet.
Buy Now