S2000 MKIII
- Bluetooth V5.0 with Qualcomm® aptX™ HD decoding
- 5 ½’’ Aluminium diaphragm drivers for ultimate bass response
- Patent-pending planar diaphragm tweeters that adapt to a wide range of acoustic conditions
- High efficiency Class-D digital power amplification
- Electronic crossovers and dynamic control based on dual advanced DSP chips
- Supports digital audio signal with sample rate up to 24BIT/192KHZ
- Listening presets: Monitor, Dynamic, Classical, and Vocal
- OLED LCD screen displays source/volume/sound effects modes for more convenient use
- PVC side panels with matte black finish
- IR remote control
Rp1,899
Stok habis
Stok habis
Also Available Here
Share
| Specifications | S2000 MKIII |
|---|---|
| Total Power Output | L/R (treble): 15W + 15W RMS L/R (mid-range bass): 50W + 50W RMS |
| Signal to Noise Ratio | ≥90dB(A) |
| Noise Level | ≤25dB(A) |
| Frequency Response | 45Hz ~ 40KHz |
| Input Sensitivity | Line 1: 800+/-50mV Line2: 600+/-50mV Bluetooth:450+/-mFFs Optical/Coaxial: 350+/-mFFs |
| Connection Cable | 5M/16.4FT |
| Digital Audio Signal | Up to 24BIT/192KHz |
| Bass Unit | 5.5 Inch Aluminium diaphragm drivers |
| Tweeter Unit | Planar diaphragm tweeters |
| Finishing | PVC side panels with matte black finish |
S2000 MKIII FAQ:
A: Yes. you can connect to your TV via RCA cable, Optical or AUX cables. Please check your TV audio out port to see if it support these connectors.
A: Please check your speaker input mode. you can press the volume knob on the speaker to change mode. the LED indicator will change to represent current mode.
A: Press and hold the volume knob for approx. 8-10 seconds to clear Bluetooth Pairing. then you can pair with your phone/device.
A: Try change the battery and see if it works.
Recently Viewed
Out of stock
Buy Now